Erasing Fill

Description of your first forum.

Erasing Fill

PostPosted by Measure Dynamics » Thu Apr 07, 2016 8:32 pm

Is there a way to erase all the fill in a drawing at the same time? The fills are are different layers and there are other items on the layers that are still needed. Thanks.
Measure Dynamics
 
Posts: 7
Joined: Tue May 27, 2014 7:41 pm

Re: Erasing Fill

PostPosted by Measure Dynamics » Thu Apr 07, 2016 9:24 pm

Never mind I figured it out. I edited all the drawing fill to another layer and erased it that way.
Measure Dynamics
 
Posts: 7
Joined: Tue May 27, 2014 7:41 pm

Re: Erasing Fill

PostPosted by Tom Albright » Mon Apr 11, 2016 12:29 pm

ER, Filter, Fill
Tom Albright
Tom Albright
 
Posts: 92
Joined: Mon Jun 02, 2014 6:53 pm
Location: Billings, MT

Re: Erasing Fill

PostPosted by Matt » Mon Apr 11, 2016 1:58 pm

Try ER,Q,pick fill,Enter,Enter
Matt
Site Admin
 
Posts: 149
Joined: Mon Apr 21, 2014 2:31 pm
Location: Spokane, WA

Re: Erasing Fill

PostPosted by Tom Albright » Tue Apr 12, 2016 12:29 pm

Matt

When did the Q option appear?
Tom Albright
Tom Albright
 
Posts: 92
Joined: Mon Jun 02, 2014 6:53 pm
Location: Billings, MT

Re: Erasing Fill

PostPosted by Matt » Wed Apr 13, 2016 1:13 pm

After typing ER. Part of the selection options list, between [L]ast and [F]ilter
Matt
Site Admin
 
Posts: 149
Joined: Mon Apr 21, 2014 2:31 pm
Location: Spokane, WA

Re: Erasing Fill

PostPosted by Tom Albright » Wed Apr 13, 2016 4:58 pm

When - How long has that been there?
Tom Albright
Tom Albright
 
Posts: 92
Joined: Mon Jun 02, 2014 6:53 pm
Location: Billings, MT

Re: Erasing Fill

PostPosted by Matt » Wed Apr 13, 2016 10:39 pm

Years!
Matt
Site Admin
 
Posts: 149
Joined: Mon Apr 21, 2014 2:31 pm
Location: Spokane, WA

Re: Erasing Fill

PostPosted by Bjorn Holmgren » Thu Apr 14, 2016 5:26 am

V8 I say.
V7 does not include it from what I can see.
Bjorn Holmgren
 
Posts: 50
Joined: Fri Jun 06, 2014 11:04 am
Location: Sunshine Coast QLD Australia

Re: Erasing Fill

PostPosted by Tom Albright » Thu Apr 14, 2016 12:20 pm

:o :shock: :roll:
Tom Albright
Tom Albright
 
Posts: 92
Joined: Mon Jun 02, 2014 6:53 pm
Location: Billings, MT

Re: Erasing Fill

PostPosted by Bjorn Holmgren » Fri Apr 15, 2016 3:43 am

Correction, it IS indeed included in V7. In V6 - no.
Bjorn Holmgren
 
Posts: 50
Joined: Fri Jun 06, 2014 11:04 am
Location: Sunshine Coast QLD Australia


Return to General CADD Forum

Who is online

Users browsing this forum: No registered users and 0 guests

cron